Nissan Murano: NISSAN Advanced Air Bag System (front seats) / Front passenger air bag and status light

WARNING
The front passenger air bag and passenger
knee air bag are designed to automatically
turnOFFundersomeconditions.
Read this section carefully to
learn how it operates. Proper use of the
seat, seat belt, and child restraints is
necessary for most effective protection.
Failure to follow all instructions in
this manual concerning the use of
seats, seat belts, and child restraints
can increase the risk or severity of injury
in an accident.
Supplemental front-impact air bag modules
Air bag Control Unit (ACU)
Occupant classification sensor (weight sensor)
Front seat-mounted side-impact supplemental air bag modules
Roof-mounted curtain side-impact and rollover supplemental air bags
Roof-mounted curtain side-impact and rollover supplemental air bag
inflators
Rear outboard seat-mounted sideimpact supplemental air bag modules
Seat belt with pretensioner(s) (rear outboard seats)
Satellite sensors
Seat belt with pretensioner(s) (front seats)
Pressure sensors in door (driver’s side shown; front passenger side is
similar)
Driver and passenger supplemental knee air bags
Crash zone sensor
WARNING
To ensure proper operation of the passenger’s
NISSAN Advanced Air Bag System,
please observe the following
items...
The front passenger seat is equipped with
an occupant classification sensor (weight
sensor) that turns the front passenger air
bag and passenger knee air bag on or off
depending on the weight applied to the
front passenger seat...
Other information:
Operating tips
The power seat motor has an autoreset
overload protection circuit. If the
motor stops during operation, wait
30 seconds then reactivate the switch.
Do not operate the power seat switch
for a long period of time when the engine
is off...
Check the coolant level in the reservoir
when the engine is cold. If the coolant
level is below the MIN level , add
coolant
to the MAX level . If the reservoir
is empty,
check the coolant level in the radiator
when the engine is cold. If there is insufficient
coolant in the radiator, fill the radiator
with coolant up to the filler opening and
also add it to the reservoir up to the MAX
level ...