Other information:
Precautions for Trouble Diagnosis
CAUTION:
Follow the instructions listed below. Failure to do this may cause damage to parts:
Never apply 7.0 V or more to the measurement terminal.
Use a tester with open terminal voltage of 7.0 V or less.
Turn the ignition switch OFF and disconnect the battery cable from the negative terminal when checking the harness...
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition
B2195
ANTI-SCANNING
(Anti-scanning)
Diagnosis condition
When ignition switch ON.
Signal (terminal)
—
Threshold
ID verification between BCM and ECM that is out of the designated specification is detected
Diagnosis delay time
—
POSSIBLE CAUSEID verification request out of the designated specificationFAIL-SAFEInhibit engine cranking
DTC Confirmation Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON...