Nissan Murano: Power moonroof (if so equipped) / Panoramic sunshade
The panoramic sunshade operates when
the ignition switch is in theONposition.The
sunshade switch is located near the roof
console. When opening or closing the sunshade
the switch need not be held.
To open the sunshade:
- To fully open the sunshade, push the
switch toward the open position .
To close the sunshade:
- To fully close the sunshade, push the
switch toward the close position .
WARNING
- To avoid personal injury, keep your
hands, fingers and head away from
the sunshade arm, the arm rail and
sunshade inlet port.
- Do not allow children near the rear
sunshade system. They could be
injured.
- Do not place objects on or near the
rear sunshade. This could cause improper
operation or damage it.
- Do not pull or push the rear sunshade.
This could cause improper operation
or damage it.
CAUTION
- Donot place objects (such asnewspapers,
handkerchiefs, etc.) on the sunshade
inlet port. Doing so may entangle
these objects in the sunshade
when it is extending or retracting,
causing improper operation or damage
to the sunshade.
- Do not push the sunshade arm with
your hands, etc., as thismaydeformit.
Improper operation or damage to the
sunshade may result.
- Do not put any object into the sunshade
inlet port as this may result in
improper operation or damage the
sunshade.
- Do not hang any object on the arm rail
as this may result in improper operation
or damage the sunshade.
- Do not forcefully pull the sunshade.
Doing so may elongate the sunshade.
Improper operation or damage to the
sunshade may result.
If the moonroof does not close
Have your moonroof checked and repaired.
It is recommended that you visit a
NISSAN dealer for this service.
The auto-reverse function can be activated
when the moonroof is closed or
tilted down by automatic operation when
the ignition switch is placed in the ON position
or for a period of time after the ignition
switch is placed in the OFF position...
When the ON switch is
pushed, the footwell
lights (if so equipped), step lights (if so
equipped), map lights and rear personal
lights will automatically turn on and stay on
for a period of time when:
The doors are unlocked by the Intelligent
Key, a key or the request switch (if
so equipped) while all doors are closed
and the ignition switch is in the OFF
position...
Other information:
..
Place the ignition switch in the LOCK
position.
Close all doors.
Press the button on the
Intelligent
Key.
The hazard warning lights flash twice,
the horn beeps once, and the front and
tail lights may turn on for 10 seconds.
All doors will be locked...