Nissan Murano: Windshield wiper blades / Cleaning
If your windshield is not clear after using
the windshield-washer or if a wiper blade
chatters when running, wax or other material
may be on the blade or windshield.
Clean the outside of the windshield with a
washer solution or a mild detergent. Your
windshield is clean if beads do not form
when rinsing with clear water.
Clean each blade by wiping it with a cloth
soaked in a washer solution or a mild detergent.
Then rinse the blades with clear
water. If your windshield is still not clear
after cleaning the blades and using the
wiper, replace the blades.
WARNING
Worn windshield wiper blades can
damage the windshield and impair
driver vision.
Replace the wiper blades if they are worn.
To replace the windshield wiper blades, follow
the procedure below:
Lift the wiper arm away from the windshield...
Other information:
For adjustable head restraint/headrest
Adjust the head restraint/headrest so the
center is level with the center of your ears. If
your ear position is still higher than the
recommended alignment, place the head
restraint/headrest at the highest position...
To cancel the preset speed, use one of the
following methods:
Push the CANCEL switch. The set vehicle
speed indicator will go out.
Tap the brake pedal. The set vehicle
speed indicator will go out.
If the Cruise Control Alerts are enabled
in the Driver Assistance menu, the
“Cruise ON: Press SET to engage speed
control” message will reappear in the
vehicle information display to let you
know the cruise control system is still
on if you set the target speed again...