Nissan Murano: Do-it-yourself
Nissan Murano (Z52) 2015-2024 Owners Manual / Do-it-yourself
- Maintenance precautions
- Engine compartment check locations
- Engine cooling system
- Engine oil
- Continuously Variable Transmission (CVT) fluid
- Power Steering Fluid (PSF)
- Brake fluid
- Windshield-washer fluid
- Battery
- Drive belt
- Spark plugs
- Air cleaner
- Windshield wiper blades
- Brakes
- Fuses
- Battery replacement
- Lights
- Wheels and tires
Corrosion protection
Most common factors contributing to vehicle corrosion
Most vehicle corrosion is caused by:
The accumulation of moistureretaining
dirt and debris in body panel
sections, cavities, and other areas...
Maintenance precautions
When performing any inspection or maintenance
work on your vehicle, always take
care to prevent serious accidental injury to
yourself or damage to the vehicle...
Other information:
Nissan Murano (Z52) 2015-2024 Owners Manual: System maintenance.
The sensor is located on the front of the vehicle. To keep the system operating properly, be sure to observe the following: Always keep the sensor area of the front bumper clean. Do not strike or damage the areas around the sensor. Do not cover or attach stickers or similar objects on the front bumper near the sensor area...
Nissan Murano (Z52) 2015-2024 Service Manual: P0125 Ect Sensor
DTC Description DTC DETECTION LOGIC Voltage sent to ECM from the sensor is not practical, even when some time has passed after starting the engine. Engine coolant temperature is insufficient for closed loop fuel control. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0125 ECT SENSOR (Insufficient coolant temperature for closed loop fuel control) 1 Diagnosis condition — Signal (terminal) Voltage signal transmitted from engine coolant temperature sensor to ECM Threshold Voltage sent to ECM from the sensor is not practical, even when some time has passed after starting the engine Diagnosis delay time — 2 Diagnosis condition — Signal (terminal) Voltage signal transmitted from engine coolant temperature sensor to ECM Threshold Engine coolant temperature is insufficient for closed loop fuel control Diagnosis delay time — POSSIBLE CAUSE Harness and connectors (High resistance in the circuit) Engine coolant temperature sensor Thermostat FAIL-SAFENot applicable DTC Confirmation Procedure CHECK DTC PRIORITY If DTC P00125 is displayed with DTC P0116, P0117 or P0118, first perform the trouble diagnosis for DTC P0116, P0117 or P0118...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Settings
- High Beam Assist (if so equipped)
- Checking engine oil level
- New on site
- Most important about car
Driver and passenger supplemental knee air bag
Driver’s side
The knee air bag is located in the knee bolster, on the driver’s and passenger’s side. All of the information, cautions and warnings in this manual apply and must be followed. The knee air bag is designed to inflate in higher severity frontal collisions, although it may inflate if the forces in another type of collision are similar to those of a higher severity frontal impact. It may not inflate in certain collisions.
Passenger’s side
Copyright © 2025 www.nimurano.com