When installing a CB, ham radio or car
phone in your vehicle, be sure to observe
the following precautions; otherwise, the
new equipment may adversely affect the
engine control system and other electronic
parts...
Other information:
DTC Description
DTC DETECTION LOGICWhen the ignition switch is ON, TCM is unable to receive the CAN communications signal from AWD control unit continuously for 2 seconds or more. DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
U0102
LOST COMM (TRANSFER)
(Lost Communication With Transfer Case Control Module)
Diagnosis condition
When the ignition switch is ON
Signal
CAN communication signal
Threshold
TCM is unable to receive the CAN communications signal from AWD control unit
Diagnosis delay time
Continuously for 2 seconds or more
POSSIBLE CAUSE
AWD control unit
Harness or connector (CAN communication line is open or shorted)
FAIL-SAFENot changed from normal driving
DTC Confirmation Procedure
PREPARATION BEFORE WORK
If another “DTC CONFIRMATION PROCEDURE” occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test...
The sunshade is made from a tricot material.
CAUTION
To help prevent damaging the moonroof
while cleaning:
Do not rub the material with a cloth.
Doing so can damage the surface of
the material or cause a stain to
spread.
Never use benzine, thinner or any
similar chemical to clean the sunshade...